At Big Easy Kitchens, we remodel kitchen countertops across Greater New Orleans, from a full stone replacement to a resurface that keeps the cabinets you have. The worktop is the largest surface in the room, so changing it changes everything around it.
Free, detailed initial consultation. No obligation.
What we give you
A worktop is judged every day for the next decade, usually with a hot pan in one hand. Everything below is part of the job on any New Orleans kitchen we take on.

We template the run from the cabinets themselves rather than working from a drawing. Older houses settle, and a worktop cut to an assumed measurement is a worktop that does not sit flat.
Every surface asks something of you, whether that is sealing, care around heat, or wiping spills quickly. You hear that before you choose, not after the invoice.
The edge profile changes how heavy the worktop reads far more than the thickness does. We show you the options against your own cabinets rather than in a showroom.
Cutouts, undermount fixing, and the splashback join are part of the same job. Leaving them to a separate trade is where most countertop projects go wrong.
The people who template are the people who fit, licensed plumbing included for the sink and taps. One team, one schedule, one number to call.
If resurfacing or refinishing gives you what you want, we will say so. There is no sense selling stone to a kitchen that needed a facelift.
Tell us what your worktops are now and we will tell you what is worth doing.
Ways to update
Replacement is not the only route, and it is often not the best value one. These are the options we walk homeowners through here.

New worktops templated and fitted to the cabinets you have. This is the route when the surface has failed or the layout is changing anyway.

A specialist coating changes the colour and the finish for a fraction of a replacement. It is not permanent, and it will not take heat or standing water the way stone does.

Laminate sheets, timber planks, or tile laid over a sound existing surface. Fast and inexpensive, though it will need removing or redoing eventually.

Adhesive vinyl cut to your worktop, in anything from a flat colour to a pattern. The cheapest change available, and honestly the shortest lived.

Timber worktops sanded back, repaired, and re-oiled rather than replaced. A tired butcher block usually has years left in it.

A resin finish rolled over the existing worktop to give a poured concrete look. It needs a properly prepared surface, which is where most attempts fail.
Not sure whether yours need replacing or just reviving? We will tell you which.
Surfaces
Homeowners usually choose on look and budget, then live with the maintenance. We would rather you knew both before you decide.

Granite and marble bring pattern that no manufactured surface reproduces, and every slab is different. They are porous, so sealing is part of owning them.

Quartz gives you a consistent surface that resists chipping and needs no sealing. It is the most forgiving choice in a busy New Orleans kitchen.

Butcher block, laminate, and tile each have a place, usually on an island or a secondary run. Timber is repairable in a way stone is not.
Bring us your kitchen and we will show you these against your own cabinets.
Built for New Orleans homes
Worktops here contend with humidity, heat, and cabinets that have shifted over decades. All three change what we recommend.
Natural stone stays porous whatever the climate, and a kitchen that never fully dries out is unforgiving of a lapsed seal. We tell you the sealing interval before you choose granite or marble.
Older New Orleans houses settle, and a century-old run is rarely flat along its whole length. Templating from the cabinets rather than from a drawing is what keeps a stone top from rocking.
Many kitchens in this city have one usable wall, so the worktop has to work as prep space, landing space, and storage surface at once. That changes both the depth and the material we suggest.
We specify worktops for what our climate and our older houses actually do to them.
The details
The material is the decision everyone remembers. These three are the ones that decide how the finished worktop actually reads.

A squared edge reads modern and a bullnose reads softer, and the same slab can do either. The profile changes the apparent weight of the worktop more than the thickness does.

Porous surfaces need resealing on a schedule, and skipping it is how a stain becomes permanent. Quartz asks for none of this, which is why it wins in busy households.

Where the worktop meets the wall is where water gets in and where a job looks unfinished. We decide that detail with the worktop rather than after it.
How it works
Three stages on every New Orleans worktop job, whether it is stone or a resurface. Nothing is cut until you have seen the plan.
We measure the run off the cabinets and take the sink and hob positions from the room, not from a drawing. Material and edge get chosen at the same visit.
The slab is cut, the cutouts machined, and the edges finished before anything comes to your house. This is where the lead time sits on stone.
Old tops out, new tops in, sink and taps reconnected by our own licensed plumber. Most kitchens are back in use the same day.
Scope and timeline
Worktops range from a weekend refresh to the largest line in a renovation, and the gap is mostly scope rather than brand. We give you a firm figure at the New Orleans consultation.
The material, the length of the run, how many cutouts are needed, and whether there is an island with exposed ends. Waterfall ends and mitred edges add fabrication time rather than just material.
Resurfacing a sound worktop instead of replacing it is the single largest saving on the table. So is keeping the sink where it already is.
Coatings, overlays, and refinishing are usually a day or two. Stone and quartz take longer because the slab has to be templated, fabricated, and then delivered before anything is fitted.
The fitting itself is rarely the long part. You get the full schedule with the quote so you know when the kitchen is out of action.
We measure, walk the plan with you, and hand you a firm number at the consultation rather than a range you cannot budget against.
Before you start
A few decisions settled early save money and regret later. These are the ones New Orleans homeowners most often wish they had made sooner.
A surface that stains easily is a poor fit for a household that cooks with turmeric and red wine. Choose for your actual kitchen habits, not for the one in the brochure.
An undermount sink changes the cutout, the fabrication, and sometimes the material. Settling it late is what turns a simple job into a revised quote.
Stone reads completely differently under a showroom spotlight than under a single New Orleans kitchen window. Take the sample home before you commit to a slab.
Bring us the room you have and we will plan it with you before anything is ordered.
Explore further
Worktops are rarely decided on their own. These are the services most often booked alongside a countertop remodel here.

How each surface behaves in Gulf Coast humidity. Read this before you settle on a worktop material.

Worktops sit on cabinets, so the two decisions are linked. This page covers installing, refacing, and building them.

New worktops on tired cabinet fronts rarely looks finished. Refinishing brings the two back into step.

Where the layout is settled before anything is ordered. Worth doing first if walls or the sink are moving.

In a compact kitchen the worktop is prep, landing, and storage at once. This page covers making that footprint work.

A worktop is the largest block of colour in the room. This page covers how that choice changes the space.
Countertop questions answered
The questions homeowners here ask us most before worktops are ordered. If yours is not below, call us and we will answer it straight.
Quartz handles our climate with the least effort from you, because it is non-porous and needs no sealing at all. Natural stone performs perfectly well here too, provided you keep to the sealing schedule rather than letting it lapse for a few years.
Timber is the one that asks the most. It is repairable in a way stone is not, but it wants oiling and it will not tolerate standing water.
Yes, and it is one of the most cost-effective changes available in a New Orleans kitchen. We template off the cabinets you already have, so the new worktop is cut to the run as it actually sits rather than as it was originally built.
The one thing to check is whether the cabinet fronts still look right against a new surface. Tired doors under new stone is the most common regret we hear.
Coatings, overlays, and butcher block refinishing are usually a day or two from start to finish. Stone and quartz take considerably longer, because the slab has to be templated on site, fabricated in the workshop, and then delivered before any fitting can begin.
The fitting itself is rarely the long part of the job. You get the full schedule with the quote so you can plan around the days without a kitchen.
Quartz is non-porous, so humidity itself does not affect it and everyday spills wipe off without leaving a mark. The realistic risks are heat damage from a pan set straight down and harsh chemical cleaners, neither of which is a climate issue.
That is why we recommend it most often for busy New Orleans households. It asks almost nothing of you once it is in.
Tile decals and specialist coatings are the least expensive changes available, and both can transform a tired kitchen for very little. Neither is permanent, and neither will take the heat or standing water that a stone surface handles without complaint.
If the existing worktop is structurally sound, an overlay or a refinish usually gives better value over time than a decal.
Usually yes, and a tired timber worktop in a New Orleans kitchen often has years left in it once it has been sanded back properly. We repair the damage, take the surface down to clean timber, and then re-oil or seal it depending on how hard that run gets used.
Yes, the cutout, the undermount fixing, and the reconnection of the taps are all part of the same job, carried out by our own licensed plumber. Splitting that work across two separate trades is where most countertop projects lose a day and gain an argument.
We remodel countertops across Greater New Orleans and the surrounding parishes, including Metairie, Covington, Mandeville, Madisonville, Abita Springs, Slidell, and Hammond. If your city is not on that list, call us and we will tell you straight away whether we cover it.
Still weighing replacement against a resurface? Call us and we will tell you which is worth it.
Tell us about your kitchen anywhere in Greater New Orleans or the surrounding parishes. We will come out, take measurements, and give you a real number for the design, the materials, and the labor.
Loading the estimate form. If it does not appear, call 504-383-9473.